Liquid Soap Concentrate

Manufacturing Process

Before starting the process of making the industrial cleaner, rinse all tools with DM water (Demineralised water). We recommend liquid soap manufacturers to always use clean tools for making the product in order to maintain quality and get the best results.

Step 1

Take required quantity of DM water in HDPE drum (TDS of water must be below 50)

Step 2

Start stirring the concentrate in the drum


Step 3

Add Liquid Soap Concentrate very slowly while stirring

Step 4

Continue stirring till solution is uniform and homogeneous

Step 5

For best results, keep this solution as it is for 10 hours

Step 6

After 10 hours, the liquid soap solution is ready for filling
 

 

 

 

Note
For safety purposes, always use appropriate hand gloves, goggles, and mask. If your eyes come in contact with the chemical, thoroughly rinse it with clean water. If irritation persists, immediately contact a medical practitioner.
* Keep the product away from acidic materials like Hydrochloric acid (HCL) and Toilet Cleaner.